Our machinery
Three machining centres and four CNC lathes — for one-off parts as well as series of up to 10,000 pieces. Here you can see how large your part can be.
Machining centres
Complex 5-axis milled parts, and series parts on the horizontal centre with pallet changer.
DMG Deckel Maho DMU 100 T
Vertical machining centre with swivel head and rotary table — our largest milling machine.
| Travels X / Y / Z | 1,060 / 710 / 710 mm |
|---|---|
| Table | 1,500 × 795 mm |
| Tool positions | 32 |
Ideal for: large housings, plates, fixtures, parts with angled bores and faces.
DMG Deckel Maho DMU 60 P
5-axis machining centre with rotary-tilting table for small and medium-sized parts.
| Travels X / Y / Z | 600 / 700 / 550 mm |
|---|---|
| Rotary table | Ø 630 mm |
| Table load | 350 kg |
Ideal for: freeform surfaces, multi-side machining in one setup, prototypes.
Starrag Heckert CWK 400 D
Horizontal machining centre with rotary axis and two pallets: the next job is set up while the machine is running.
| Travels X / Y / Z | 650 / 650 / 650 mm |
|---|---|
| Pallets | 2 × 500 × 400 mm |
| Pallet load | 400 kg |
Ideal for: series parts, four-side machining, hydraulic and valve blocks.
Lathes and turn-mill centres
From complete machining of large shafts to series production from the bar feeder or robot.
Mazak Integrex 30
Multitasking machines: turning, milling and drilling in one setup, with sub-spindle.
| Turning diameter | up to Ø 400 mm |
|---|---|
| Turning length | up to 1,500 mm |
| Bar capacity | Ø 64 mm |
Ideal for: shafts with slots and cross holes, flanges, complex turned parts that would otherwise need two machines.
Hardinge Talent 8/52
Precision bar-fed turning centre with bar feeder — also runs unattended.
| Bar capacity | Ø 52 mm |
|---|---|
| Turning diameter | up to Ø 280 mm |
| Spindle speed | up to 5,000 rpm |
Ideal for: small turned parts in series, bushings, pins, spacer sleeves.
Hitachi Seiki CS 20 MC
Vertical lathe with inverted spindle, loaded by a robot — for chucked parts in series.
| Swing diameter | up to Ø 400 mm |
|---|---|
| Turning length | up to 150 mm |
| Chuck / part weight | Ø 210 mm / up to 20 kg |
Ideal for: discs, rings, covers and blanks in larger quantities.
Materials: from structural steel to PEEK
Structural, tool and free-cutting steel, stainless steel up to super duplex, aluminium, copper alloys, titanium and engineering plastics — all grades with material numbers on a separate page.
Accuracy and quantities
- General tolerances to DIN ISO 2768-m, tighter as per drawing
- Fits down to IT7, for example H7 bores and h6 shafts
- Surface finish down to Ra 0.8 (Rz 4) by fine finishing, finer by grinding
- Quantities from a single part up to 10,000 pieces per order
- Unattended series: bar feeder, loading robot and pallet changer
Will your part fit our machines?
Send us your drawing or STEP file — we will quickly tell you on which machine and at what price we can make it.